Bridgnorth - Dry Rot Eradication

Summary of Scope of Work

1. Preparation and Protection:
    
   • Protect the floor in the ground floor (GF) meeting room.
    
   • Install polythene hoarding to the glazed partition.
 
2. Demolition and Removal:
    
   • Remove wall finishes in the GF meeting room.
    
   • Strip back the ceiling as required and set aside for re-installation.
    
   • Remove ceiling finishes on the bulkhead to expose floor joists for propping.
    
   • Uplift and dispose of all carpet tiles.
 
3. Structural Work:
    
   • Structural engineer to design and provide sketches for propping.
    
   • Supply and install props as per structural engineer’s recommendations.
    
   • Replace the existing timber column with a 152x152x30kg UC steel column, with 10mm plates welded to the top and bottom.
 
4. Specialist Treatment:
    
   • Treat affected areas for dry rot eradication.
 
5. Reconstruction:
    
   • Rebuild the boxing at the front elevation internally, insulate with Rockwool mineral insulation, and finish with plasterboard.
    
   • Reboard and skim the left-hand wall in the meeting room.
    
   • Reboard the bulkhead, decorate, and reinstate the suspended ceiling.
 
6. Finishing:
    
   • Redecorate the entire room.
    
   • Install new carpet tiles across the meeting room.
 
7. Electrical and Systems:
    
   • Electrician to isolate/recommission all electrics at the start and end of the project.
    
   • Coordinate fire alarm, smoke heads, and security alarm systems with the client.

‍